Tagged: Learn how to make papier mache

Oct 07

How to Make Papier Mache – Halloween Skull Part 2

How To Make A Papier Mache Skull Part II (courtesy of HayCrossHollow)

Hello, this is Jeremy Edsall, and this is the 2nd part of my making a papier mache skull. In this segment, we’ll be working on building the skull. We’ve already worked on the jawbone, as you see here. And, what we’re doing is working on the top of the jaw – the top of the teeth and the top portion of the skull. We do that by taking a piece of cardboard, wrapping it up in aluminum foil and folding it over several times, and you’ll see how that gets folded and molded, and then that becomes part of the face of the skull.

And you test-fit it into the jawbone. And then, what you want to do is depress this center to make a little bit of a cavity for where the nose is, and that will become apparent here in a minute. You will see that there is a little bit of a sculpture there. And with that indentation, you can start filling in with the papier mache, and start building that nose portion of the skull. There it is, covered with mache. It takes on a rounded appearance. And then, you can add some teeth as well, by doing the tips of the popsicle sticks. And, again, you want to test fit it to make sure it fits that jawbone.

Then, you want to get a couple of tops from plastic soda bottles. And, what you do with these, is you cover them with aluminum foil as well, as you see here. And then, press these into the sides of that front of the skull, and fill these in with papier mache. Start building around them, as you see here. Continue to build and cover. There will be a hole there in the middle, and we’ll deal with that here in a minute. What you want to do is make a ball of newspaper – kind of like a brain size – and, that kind of looks like a brain stem, cause we’re gonna leave a little piece coming down.

Insert that in that hole, put that down, turn it over, and attach it to the back of that top tooth portion and cover it up with papier mache. And start filling around that whole part of that, what I call the brain portion.

Then continue to cover, and then what you want to do is take another piece of aluminum foil. Take a long piece and wrap that around and kind of contour that in around those eye sockets, and then you can start covering that with papier mache as well. Then you just want to work around the entire skull portion, covering all those places and covering up all that aluminum foil. And just build in the top of that skull.

Most of these in these first 2 videos are all done in one time period, so you should be almost able to complete the whole project within one time period. Then, our next segment will be after I take a break and come back and finish with some details.

0
comments

Oct 07

How to Make Papier Mache – Halloween Skull Part I

How To Make A Papier Mache Skull (courtesy of HayCrossHollow)

Hello, and welcome to my video, How To Make A Papier Mache Skull. My name is Jeremy Edsall, and I am a papier mache artist. What you’re gonna need for this project is to get your hands on some Celluclay or Celluclay 2. It’s made by Activa products and you can find it at most hobby stores. It comes in various shapes and sizes, but it looks something like this in the package. What it is, is a block of ground up newspaper and some sizing, which you’ll be adding water to.

So, get the package, unwrap it, ad start to break down some of the papier mache in the bag, there. Open it up slowly, and then pour it into 2 double plastic bags. And, newspaper bags, the ones they use when it’s raining, work great. So, get a couple of those, double bag it, and then add to that 2 cups of warm water. Warm water seems to work best, and it is suggested for mixing. So, pour your warm water directly into the papier mache, until it looks like this. Then, close up one end and start the kneading process.

Now, if you did this in a bowl, it would get all between your fingers and under your rings and it would really be a mess, because, once it sticks to your skin it starts to dry, get crusty and is very hard to get off. So, you want to do this in a bag and minimize some of the mess and dust, because it can kick up a lot of dust. So, this is really the best way to do it! Works for me. Mix it thoroughly – knead it until all the dry is gone and you just have a mass of gray! Put this in the refrigerator, because it is perishable, and try to use it as soon as possible.

Now, for the skull, get some cardboard, cut it out in this shape, some wire, some masking tape and a hole punch. Take your hole punch and punch a hole in each side of the jawbone. Then, take your wire, bend it like so, place it on the cardboard, and securely fasten it in with masking tape so it looks like this. Then, take the whole thing, put it on some aluminum foil, and start to fold, from bottom to top, like so. Fold it over, fold the top over, til it looks like this from the back, and it looks like this from the front.

Now, you’re gonna have to cut a few, little slits in there with your scissors so you can continue folding the rest over, and then you can fold it over real neat until it looks like this. And then, go ahead and re-punch the holes in there. You should be able to see them through the aluminum foil. And bend the whole thing so it looks like a jawbone. And that’s what it looks like from the top and from the bottom. Now, the aluminum fol will help your papier mache stick.

Then you can start coating it. Coat the inside, all the surfaces. Make sure you don’t plug up those holes. Then, get yourself some popsicle sticks. Cut the ends off with some snips. You can saw them, but this is the fastest way to do it. And you can take those, once you’ve gotten most of it covered, especially in that front area,and place them in there for the teeth. And then, continue to cover that jawbone. All the different sides. Remember again, don’t plug up those holes! Cover all the sides, and what you’ll have is your skull jawbone! And then you can start working on the top of the skull. (Go to Part II Video)

0
comments